Maximum cross-correlated kurtosis-based unsaturated stochastic resonance and its application to bearing fault diagnosis

Considering the random impulses of mechanical noise and the limitations involved while identifying mechanical fault impulse signals via traditional measurement indices of signal-to-noise ratio, which require the characteristic frequency to be known in advance, this study proposes an adaptive unsaturated stochastic resonance method employing maximum cross-correlated kurtosis as the signal detection index. The proposed method combines the features of a cross-correlated coefficient to indicate periodic fault transients and those of spectrum kurtosis to locate these transients in the frequency domain. Actual vibration signals collected from motor and gear bearings subjected to heavy noise are used to demonstrate the effectiveness of the proposed method. Through a coarse tree-based machine learning method, the proposed method is verified to be more suitable for explaining the periodic impulse components of bearing signals, as compared to the ensemble empirical mode decomposition denoising method and unsaturated stochastic resonance using the kurtosis-intercorrelation index.     

点火准则和稀释气体对乙烯点火延时的影响

利用矩形截面激波管研究点火准则和稀释气体对乙烯点火延时的影响。采用压电传感器记录测点压力时间历程，采用光谱仪和光电倍增管记录自发光强时间历程，以压力、总自发光强与·OH和·CH自由基特定能级发射光强等信号判定是否发生自点火，给出自点火过程的时间起始点和终止点，得到了不同点火准则和稀释气体对应的乙烯/氧气/氮气和乙烯/氧气/氩气点火延时。结果表明:相同工况的乙烯点火延时测量数据相对误差约为15%，数据验证了本文实验和测量方法可靠性。针对当量比为1.0、压力为0.2 MPa，得到了温度范围为905～1 489 K，稀释气体的摩尔分数为75%氮气和75%氩气时的乙烯点火延时，给出点火延时和温度拟合的Arrhenius型表达式。不同点火准则会影响所测点火延时数据，但多次测量结果确定的点火延时和温度变化规律近似相同。不同稀释气体对激波管自点火流场的影响表现为和流场均匀性以及混合物比热相关。相同工况的乙烯/氧气/氮气点火延时大于乙烯/氧气/氩气点火延时。高温区和低温区的乙烯/氧气/氩气点火延时与温度的拟合关系不同，转折温度约为1 121 K。     

Research on detection method of multi-frequency weak signal based on stochastic resonance and chaos characteristics of Duffing system

Weak signal detection has been widely used in many fields such as military and national economy. Aiming at the problem that the traditional stochastic resonance (SR) method can’t obtain the signal amplitude when detecting weak signals, the frequency and amplitude of the weak signal are obtained by combining the SR and chaos characteristics of the two-dimensional Duffing system. Firstly, the effects of two-dimensional Duffing system parameters a, b, k, noise intensity D on the Kramers rate and signal-to-noise ratio (SNR) are analyzed under the Gaussian white noise environment. The results show that the damping ratio K can hinder the SR effect of the system to some extent. Secondly, to solve the misjudgment of the state method of the weak signal amplitude in the detection, the Lyapunov exponent is used to assure the threshold's range, and the threshold of the chaotic critical state is found. Finally, the paper gives the processes of frequency and amplitude detection of multiple high-frequency signals, which realizes the effective detection of the frequency and amplitude of multiple high-frequency signals in a Gaussian white noise environment, and successfully applies the method to the accurate detection of boundary voltage amplitude in electrical impedance tomography.     

Controllable tomography phase microscopy

Tomography phase microscopy (TPM) is a new microscopic method that can quantitatively yield the volumetric 3D distribution of a sample׳s refractive index (RI), which is significant for cell biology research. In this paper, a controllable TPM system is introduced. In this system a circulatory phase-shifting method and piezoelectric ceramic are used which enable the TPM system to record the 3D RI distribution at a more controllable speed, from 1 to 40 fps, than in the other TPM systems reported. The resolution of the RI distribution obtained by this controllable TPM is much better than that in images recorded by phase contrast microscopy and interference tomography microscopy. The realization of controllable TPM not only allows for the application of TPM to the measurement of kinds of RI sample, but also contributes to academic and technological support for the practical use of TPM.     

长杆高速侵彻问题研究进展

由高密度金属制成的长杆弹在1.5$\sim$3.0km/s的下具有很强的侵彻和贯穿能力,长杆高速侵彻问题现已成为穿甲侵彻领域的研究热点.本文综述了长杆高速侵彻问题的最新研究进展,首先介绍了长杆高速侵彻的基本概念、研究方法和理论模型;其次重点论述了研究中关注的突出问题与应用, 包括弹靶材料性质、长杆弹头部形状、长径比效应与分段杆设计、陶瓷靶抵抗长杆侵彻与界面击溃和非理想长杆侵彻;最后对未来的研究工作提出一些建议.      

具有恒定冲击载荷的梯度泡沫金属材料设计

多胞材料可通过大变形大量地吸收冲击能量，引入密度梯度可进一步提高其耐撞性。梯度多胞材料的宏观力学响应对材料密度分布极为敏感，不同类型的细观构型的影响也极为不同。已有的研究工作主要局限在对给定的密度梯度分析其动态响应，较少对耐撞性设计方法进行研究。本文针对梯度闭孔泡沫金属材料，基于非线性塑性冲击波模型发展了耐撞性反向设计方法，以维持冲击物受载恒定为目标，运用级数法获得了简化模型和渐近解。利用变胞元尺寸法构建了连续梯度变化的三维Voronoi细观有限元模型，并利用ABAQUS/Explicit有限元软件对理论设计进行数值验证。结果表明，反向设计理论简化模型的渐近解对于梯度闭孔泡沫金属材料的耐撞性设计是有效的，所提出的耐撞性设计方法在控制冲击吸能过程和冲击物受载方面具有指导意义。     

Preparation and characterization of gold nanoparticles and nanowires loaded into rod-shaped silica by a one-step procedure

Rod-shaped mesoporous silica nanoparticles (RMSN) with built-in gold nanoparticles or thin gold nanowires in the pore channels were in situ synthesized via a one-step procedure. The insertion of a hydrophobic gold precursor into the mesopores of RMSN was reached through a micellar solubilization mechanism and gold nanoparticles were achieved through a thermal reduction. The resulting RMSN and Au-RMSN samples were characterized by using X-ray diffraction, transmission and scanning microscopies (TEM and SEM), X-ray photoelectron spectroscopy (XPS), nitrogen physisorption and solid-state Nuclear Magnetic Resonance (NMR). The interaction of Au precursor (a carbene complex) with the thiol group at the silica surface was identified and found to play a crucial role in the dispersion of the uniform metal nanoparticles at the internal surface of RMSN. Moreover, TEM micrographs revealed the absence of large gold particles outside the mesopore network. The shape of Au nanoparticles and their loading amount in the mesoporous silica could be easily tuned by altering the concentration of gold precursor.     

A Petrochemical-Free Route to Superelastic Hierarchical Cellulose Aerogel

Cellulose aerogels are plagued by intermolecular hydrogen bond-induced structural plasticity, otherwise rely on chemicals modification to extend service life. Here, we demonstrate a petrochemical-free strategy to fabricate superelastic cellulose aerogels by designing hierarchical structures at multi scales. Oriented channels consolidate the whole architecture. Porous walls of dehydrated cellulose derived from thermal etching not only exhibit decreased rigidity and stickiness, but also guide the microscopic deformation and mitigate localized large strain, preventing structural collapse. The aerogels show exceptional stability, including temperature-invariant elasticity, fatigue resistance (∼5 % plastic deformation after 10⁵ cycles), high angular recovery speed (1475.4° s⁻¹), outperforming most cellulose-based aerogels. This benign strategy retains the biosafety of biomass and provides an alternative filter material for health-related applications, such as face masks and air purification.     

Numerical study of buoyancy- and thermocapillary-driven flows in a cavity

Thermocapillary- and buoyancy-driven convection in open cavities with differentially heated endwalls is investigated by numerical solutions of the two-dimensional Navier-Stokes equations coupled with the energy equation. We studied the thermocapillary and buoyancy convection in the cavities, filled with low-Prandtl-number fluids, with two aspect-ratiosA=1 and 4, Grashof number up to 10⁵ and Reynolds number ⋎Re⋎≤10⁴. Our results show that thermocapillary can have a quite significant effect on the stability of a primarily buoyancy-driven flow, as well as on the flow structures and dynamic behavior for both additive effect (i.e., positiveRe) and opposing effect (i.e., negativeRe).     

高聚物减阻溶液对壁湍流输运过程的影响

基于相同雷诺数下清水和高分子聚合物溶液壁湍流的高时间分辨率粒子图像测速技术(time-resolved particle image velocimetry, TRPIV)的对比实验, 从高聚物溶液对湍流边界层动量能量输运影响的角度分析其减阻的机理. 对比两者的雷诺应力发现高聚物的存在抑制了湍流输运过程. 这一影响与高聚物对壁湍流中占主导地位的涡旋运动和低速条带等相干结构的作用密切相关. 运用条件相位平均、相关函数和线性随机估计(linear stochastic estimation, LSE)等方法, 分析提取了高聚物溶液流场中的发卡涡和发卡涡包等典型相干结构的空间拓扑形态. 相比于清水, 高聚物溶液中相干结构的流向尺度增大, 涡旋运动的发展及低速流体喷射的强度受到削弱, 表明了添加的高聚物阻碍了湍流原有的能量传递和自维持的机理. 正是通过影响相干结构, 高聚物抑制了湍流边界层中近壁区与外区之间的动量和能量输运, 使得湍流的无序性降低, 从而减小了湍流流动的阻力.